571235 | 10-Spline Drive Flange to Hub - Axle, 10-Spline Shaft | Series 1948-1984
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: 571235 - 10-Spline Drive Flange to Hub
571235 is a 10-spline drive flange to hub fitted to Series Land Rover vehicles from 1948 to 1984. The flange locates onto the 10-spline halfshaft and secures to the wheel hub, transmitting drive torque while carrying radial and torsional loads; worn or corroded splines can cause driveline play or noise and usually require flange replacement to restore correct shaft-to-hub engagement. For vehicles fitted with a 24-spline shaft use part number 571711. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Series (1948-1984)
Frequently Asked Questions
The 571235 flange mates the 10-spline halfshaft to the wheel hub and transmits drive torque from the axle into the hub assembly. It locates onto the halfshaft splines and is secured to the hub with fasteners, taking radial and torsional loads during operation. If splines become worn, damaged or corroded this can cause driveline play or noise and the flange will normally require replacement to restore correct shaft-to-hub engagement.
| Model | Variant |
|---|---|
| Land Rover Series (1948-1984) | 10-spline halfshaft |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the flange if splines are worn, damaged or corroded, or if there is driveline play or unusual noise. Inspect the flange during routine axle or driveline servicing and replace as necessary to maintain correct shaft-to-hub engagement.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.