602192 | Head Bolt 7/16 UNC X 2.71 - V8 | Defender, Discovery, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: 602192 - Head Bolt 7/16 UNC X 2.71
602192 is a 7/16 UNC x 2.71 inch cylinder head bolt. Fitted to 3.5 and 3.9 Rover V8 carburettor and EFI engines, this bolt clamps the cylinder head to the engine block and provides the clamping force required to maintain head gasket sealing under operating conditions. Inspect the bolt for damage or corrosion whenever the cylinder head is removed and follow the manufacturer's service procedure for replacement and tightening.
Compatibility
- Discovery 1 (1989-1998) - 3.5L V8 Twin Carb Petrol; 3.5L V8 EFI Petrol (From VIN FA393361 to WA799999)
- Defender (1987-2006) - 3.5L V8 Twin Carb Petrol
- Range Rover Classic (1986-1991) - V8 Twin Carb Petrol (To VIN HA610293)
- Range Rover Classic (1992-1994) - V8 EFI Petrol (From VIN JA610294)
Frequently Asked Questions
602192 is a 7/16 UNC x 2.71 inch cylinder head bolt used to clamp the cylinder head to the engine block on Rover 3.5L and 3.9L V8 carburettor and EFI engines. It provides the clamping force necessary to maintain head gasket sealing against combustion and coolant pressures. Inspect and replace any bolts that are damaged, corroded or show signs of distortion when the head is removed.
| Model | Variant |
|---|---|
| Land Rover Discovery 1 (1989-1998) | 3.5L V8 Twin Carb Petrol; 3.5L V8 EFI Petrol (From VIN FA393361 to WA799999) |
| Land Rover Defender (1987-2006) | 3.5L V8 Twin Carb Petrol |
| Land Rover Range Rover Classic (1986-1991) | V8 Twin Carb Petrol (To VIN HA610293) |
| Land Rover Range Rover Classic (1992-1994) | V8 EFI Petrol (From VIN JA610294) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect these bolts whenever the cylinder head is removed; replace any that are stretched, damaged or corroded. When in doubt, follow the vehicle workshop manual or consult a qualified technician for correct replacement and torque procedures.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.