8510309 | Clutch Plate Assembly - V8 Petrol EFI | Discovery 2 1998-2004
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: 8510309 - Clutch Plate Assembly
8510309 is a Clutch Plate Assembly fitted to the flywheel and clutch system of manual V8 transmissions on Discovery 2 models. The clutch plate is the friction disc located between the flywheel and pressure plate; it transfers engine torque to the gearbox through a splined hub that engages the gearbox input shaft. Wear of the friction material reduces torque transmission and can produce slipping or judder under load. Correct diameter, spline count and thickness are required to ensure compatibility with the matching flywheel and pressure plate, and replacement is normally carried out as part of a clutch overhaul when the flywheel or pressure plate show wear or damage.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 2 1998-2004 - V8 Petrol EFI
Frequently Asked Questions
The 8510309 clutch plate assembly is the friction disc that sits between the flywheel and pressure plate on manual V8 Discovery 2 gearboxes. Its splined hub engages the gearbox input shaft and the friction surfaces transfer engine torque to the gearbox; worn friction material will cause slipping or judder. It is matched to a specific flywheel and pressure plate by diameter, spline count and thickness and is typically renewed during a clutch overhaul when wear is present.
| Model | Variant |
|---|---|
| Land Rover Discovery 2 (1998-2004) | V8 Petrol EFI |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the 8510309 clutch plate assembly as part of a clutch overhaul when the flywheel or pressure plate show wear or damage, or when symptoms such as slipping or judder are present. Inspect the clutch during service if any driveline slipping or poor engagement is detected.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.