EAP4830PMA | Push Pin Clip - Scrivet - TPMS | Discovery & Range Rover
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: EAP4830PMA - Wheel Arch Push Pin Clip - Scrivet
EAP4830PMA is a Wheel Arch Push Pin Clip (scrivet). Fitted within the wheel-arch assembly, it retains inner side panels and secures tyre pressure monitoring system (TPMS) components to ensure correct panel alignment and reliable sensor mounting.
Compatibility
- Discovery 3 (2005-2009) - Tyre Pressure Monitor System - From VIN 6A000001 to 9A999999
- Freelander (1996-2006) - Body mouldings / Wheel arch - From VIN 2A000001
- Range Rover (2002-2009) - Side panels inner - To VIN 9A999999
- Range Rover (2010-2012) - Side panels inner - From VIN AA000001
- Range Rover Sport (2005-2009) - Tyre Pressure Monitor System - From VIN 6A000001 to 9A999999
Frequently Asked Questions
EAP4830PMA is a push-pin scrivet used to fasten and locate inner wheel-arch panels and to secure TPMS components in place. It provides a simple retention point to maintain panel alignment and prevent movement of mounted sensors or wiring. Damaged or missing clips can allow panel vibration or sensor movement, so they should be replaced as required.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996-2006) | Body Mouldings (3 Door Soft Back/Hard Back) - From VIN 2A000001 |
| Land Rover Freelander (1996-2006) | Body Mouldings (5 Door Station Wagon) - From VIN 2A000001 |
| Land Rover Discovery 3 (2005-2009) | Tyre Pressure Monitor System - From VIN 6A000001 to 9A999999 |
| Land Rover Range Rover Sport (2005-2009) | Tyre Pressure Monitor System - From VIN 6A000001 to 9A999999 |
| Land Rover Range Rover (2002-2009) | Side Panels - Inner (Less Armoured) - To VIN 9A999999 |
| Land Rover Range Rover (2010-2012) | Side Panels - Inner - From VIN AA000001 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the clip whenever the wheel-arch liner or body mouldings are removed; replace if it is cracked, deformed or missing to ensure panels and TPMS components remain secure. If unsure, consult the vehicle manual or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.