ERR593 | Connecting Rod Assembly - 2.5L Diesel | Defender 1987-2006
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ERR593 - Connecting Rod Assembly
ERR593 is a connecting rod assembly. Fitted to the engine bottom end, this assembly transfers piston motion and combustion forces to the crankshaft, linking each piston to the crankshaft and converting the piston's reciprocating movement into rotational movement. On the 2.5L 4-cylinder naturally aspirated diesel Defender engine the connecting rod carries both compressive and tensile loads during the combustion cycle, supports the bearing shells that run on the crankshaft journal at the big end, and connects to the piston at the small end via the wrist pin. The assembly is supplied as the rod with associated fitted components for the piston, connecting rod and bearings group and is replaced during engine overhaul when wear or damage is present to restore correct running clearances and oil film on the crank journals.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) L315 - 2.5L 4-cylinder naturally aspirated diesel
Frequently Asked Questions
The ERR593 connecting rod assembly links each piston to the crankshaft and converts the piston's reciprocating motion into the crankshaft's rotation. In the 2.5L 4-cylinder naturally aspirated diesel it carries cyclic compressive and tensile loads and supports the bearing shells at the big end; the small end locates to the piston via the wrist pin. It is supplied as the rod with associated fitted components for the piston, connecting rod and bearings and should be inspected for wear or bearing failure during any engine bottom-end overhaul.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) - L315 | Piston, Connecting Rod & Bearings (2.5L 4-cylinder naturally aspirated diesel) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
The ERR593 connecting rod assembly should be replaced as part of an engine rebuild or overhaul if wear, bearing failure or other damage is detected; inspect rods and bearing shells during any bottom-end service to ensure correct running clearances are restored.
- C8 products are usually supplied by Britpart.
All products and accessories available on LRDirect.com come with a 2-year warranty.