ERR719 | Manual Flywheel - 200Tdi, 300Tdi | Defender, Discovery, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ERR719 - Manual Flywheel
ERR719 is a Manual Flywheel. This flywheel connects the 2.5L 200Tdi and 300Tdi engine crankshaft to a 5-speed manual transmission and provides the mounting face for the clutch assembly. It stores rotational energy to smooth the pulsed output of these diesel engines, provides the driven surface for the clutch friction plate and carries the starter engagement teeth. When fitting, ensure the flywheel matches the clutch cover and friction plate bolt pattern, inspect the mating surface for heat damage or scoring, check bolt torque and alignment, and fit a compatible clutch kit specified for the 5-speed manual layout.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - 200Tdi
- Defender (1987-2006) - 300Tdi
- Discovery 1 (1989-1998) - 200Tdi (From VIN FA393361 to WA799999)
- Range Rover Classic (1992-1994) - 200Tdi (From VIN JA610294)
- Range Rover Classic (1992-1994) - 300Tdi (From VIN JA610294)
Frequently Asked Questions
The ERR719 flywheel evens the pulsed torque of the 2.5L 200Tdi and 300Tdi engines by storing rotational energy, provides the driven surface for the clutch friction plate and carries the starter engagement teeth for engine cranking. Its mass and inertia affect idle stability and clutch engagement, so any replacement must match the clutch cover and friction plate bolt pattern and be correctly aligned and torqued during installation.
| Model | Variant |
|---|---|
| Land Rover Defender | (1987-2006) - 2.5L 200 Tdi, 5-speed manual |
| Land Rover Defender | (1987-2006) - 2.5L 300 Tdi, 5-speed manual |
| Land Rover Discovery 1 | (1989-1998) - 2.5L 200 Tdi (From VIN FA393361 to WA799999), 5-speed manual |
| Land Rover Range Rover Classic | (1992-1994) - 2.5L 200 Tdi (From VIN JA610294), manual |
| Land Rover Range Rover Classic | (1992-1994) - 2.5L 300 Tdi (From VIN JA610294), manual |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the flywheel if the mating face shows heat damage, cracking, severe scoring, the starter engagement teeth are worn or damaged, or if resurfacing cannot restore a true face; also inspect and replace as required when fitting a new clutch assembly.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.