ESR238 | Intermediate and Rear Exhaust Assembly - 200Tdi | Discovery 1
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ESR238 - Intermediate and Rear Exhaust Assembly
ESR238 is an intermediate and rear exhaust assembly fitted to the exhaust system of the 2.5L 4 cyl Turbo Direct Injection (200Tdi) diesel engine. The assembly provides the centre and rear silencers together with the tail pipe as a matched unit (middle and back boxes with tail section) and is supplied in a non-catalyst configuration where specified for 200Tdi applications. Mounting points and hanger interfaces align with the underside of the chassis to locate the assembly and to interface with the intermediate pipe and rear mounting hangers; use correct exhaust hangers and clamps when installing to maintain alignment and clearance from heat-sensitive components. This component is intended for vehicles from the stated VIN range and must match the vehicle engine and chassis specification before fitment.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 1 (1989-1998) - 2.5L 4 Cyl Turbo Direct Injection (From VIN GA460230)
Frequently Asked Questions
The ESR238 assembly provides the centre and rear silencers together with the tail pipe, supplying the middle and back boxes and tail section as a matched unit. It reduces exhaust noise and routes combustion gases from the rear of the vehicle. For 200Tdi applications it is supplied in a non-catalyst configuration where specified, and mounting points/hanger interfaces align with the underside of the chassis to interface with the intermediate pipe and rear mounting hangers.
| Model | Variant |
|---|---|
| Land Rover Discovery 1 (1989-1998) | 2.5L 4 Cyl Turbo Direct Injection (From VIN GA460230) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.