ESR3205 | Engine Oil Cooler - 4.6L V8 | Range Rover P38
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ESR3205 - Engine Oil Cooler - 4.6L V8
ESR3205 is an engine oil cooler for the 4.6L V8, fitted to Range Rover P38 vehicles. Installed in the engine cooling system, this coolant-cooled heat exchanger routes engine oil through internal passages so heat transfers into the engine coolant, reducing oil temperature under sustained load and helping to maintain the oil viscosity required for effective lubrication and valve-train protection. The assembly connects to oil feed and return lines and seals against coolant passages; any leakage or cross-contamination between oil and coolant indicates cooler or seal failure. When replacing the cooler, check oil lines and sealing faces and remove any residual contamination from the cooling circuit.
Please note: Models fitted with the 4.0L V8 use part ESR3204.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Range Rover P38 (1994-2001) - 4.6L V8
Frequently Asked Questions
The ESR3205 is a coolant-cooled heat exchanger that routes engine oil through internal passages so heat transfers into the engine coolant, lowering oil temperature and helping to preserve oil viscosity under load. It connects to oil feed and return lines and seals against coolant passages; leakage or oil/coolant cross-contamination indicates a failing cooler or seals. When fitted or replaced, oil lines and sealing faces should be inspected and any contamination removed from the cooling circuit.
| Model | Variant |
|---|---|
| Land Rover Range Rover P38 (1994-2001) | 4.6L V8 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the oil cooler during routine services and replace it if there is any leakage, evidence of oil in the cooling system, or physical damage. When replacing, check oil lines and sealing faces and flush any residual contamination from the cooling circuit.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.