ESR54 | Rear Exhaust Silencer - 200Tdi | Defender 110, 1987-2006
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ESR54 - Rear Exhaust Silencer - 200Tdi Without Catalytic Converter
ESR54 is a rear exhaust silencer for 200Tdi models without a catalytic converter. Fitted to the rear section of the exhaust on 110 inch wheelbase Defender 200Tdi vehicles, the silencer connects the intermediate pipe to the tailpipe and attenuates low- and mid-frequency noise from the 2.5-litre 200Tdi engine. It completes the exhaust flow path, helps control back-pressure and routes gases safely away from the vehicle body. Correct installation using the vehicle's underbody rubber hangers maintains alignment of the full exhaust run and prevents contact with the chassis or bodywork; associated mounting rubbers and fasteners should be inspected and replaced if worn to avoid exhaust leaks or vibration.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - 200Tdi (To VIN LA939975)
Frequently Asked Questions
The ESR54 rear silencer forms the final stage of the exhaust on 200Tdi Defenders, joining the intermediate pipe to the tailpipe and reducing low- and mid-frequency engine noise. By completing the exhaust flow path it helps maintain appropriate back-pressure and directs gases clear of the vehicle body. During fitting, check mountings and rubbers for wear as loose or damaged fixings can cause leaks or vibration.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | 200Tdi (To VIN LA939975) - Rear, 110 inch wheelbase (without catalytic converter) |
| Land Rover Defender (1987-2006) | 2.5L 4 Cyl TDi - Rear (110, 130 Wheelbase) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the silencer during routine services and replace it if there is significant corrosion, perforation, exhaust leakage or excessive noise. If in doubt, consult the vehicle handbook or a qualified technician to confirm replacement requirements.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.