ETC8808 | M12 x 100mm Head Bolt - Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ETC8808 - M12 x 100mm Hex-Headed Cylinder Head Bolt
ETC8808 is an M12 x 100mm hex-headed cylinder head bolt. Fitted to the cylinder head on 200Tdi and 300Tdi engines, it secures the head to the engine block and must be used as part of the correct head bolt set during overhaul or head gasket replacement.
Please note: To replace all head bolts on the 300Tdi engine you will need ETC8808 x 4, ERR1939 x 10 and ETC8810 x 4. For the 200Tdi engine you will need ETC8808 x 4, ETC8809 x 10 and ETC8810 x 4.
Compatibility
- Defender (1987-2006) - 200Tdi
- Defender (1987-2006) - 300Tdi
- Discovery 1 (1989-1998) - 200Tdi (From VIN FA393361 to WA799999)
- Discovery 1 (1989-1998) - 300Tdi (From VIN FA393361 to WA799999)
- Range Rover Classic (1992-1994) - 200Tdi (From VIN JA610294)
- Range Rover Classic (1992-1994) - 300Tdi (From VIN JA610294)
Frequently Asked Questions
ETC8808 is an M12 x 100mm hex-headed cylinder head bolt used to clamp the cylinder head to the engine block on 200Tdi and 300Tdi engines. When replacing the head bolts it must be used together with the other specified bolts (ERR1939 and ETC8810, plus ETC8809 for 200Tdi) and installed following the manufacturer's sequence and service guidance.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | 2.5L I4 200 TDi (Cylinder Head) |
| Land Rover Defender (1987-2006) | 2.5L I4 300 TDi Diesel Turbo (Cylinder Head) |
| Land Rover Discovery 1 (1989-1998) | 2.5L 200 TDi (From VIN FA393361 to WA799999) |
| Land Rover Range Rover Classic (1992-1994) | 2.5L TDi (From VIN JA610294) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.