FRC5442 | Front Output Flange - LT230 | Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: FRC5442 - Front Output Flange - LT230
FRC5442 is a front output flange for the LT230 transfer box. Fitted to vehicles with the LT230 transfer box, this flange links the transfer box output shaft to the front driveshaft and positions and retains the output coupling while transmitting torque from the transfer box to the front propeller shaft. Service work on the LT230 transfer box or replacement of the front driveshaft commonly requires this flange when renewing worn or damaged output components; correct installation requires alignment of the transfer box output and driveshaft splines and securement to the transfer box output housing.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - From unit 32D526135
- Discovery 1
- Range Rover Classic (1986-1991)
Frequently Asked Questions
FRC5442 provides the mechanical connection between the LT230 transfer box and the front driveshaft, retaining the output coupling and transmitting torque to the front propeller shaft. It is typically replaced when output components are worn or when carrying out service work on the LT230 or front driveshaft. Correct fitting requires alignment of the transfer box and driveshaft splines and securement to the transfer box output housing.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | L315 - From unit 32D526135 |
| Land Rover Discovery 1 | |
| Land Rover Range Rover Classic (1986-1991) | To HA610293 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the flange if it is worn, damaged, or during LT230 transfer box or front driveshaft service when output components are being renewed. Inspect the flange when removing the driveshaft or servicing the transfer box and fit a replacement if there is any sign of wear, damage or poor fitment.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.