FTC3188 | Rear Stub Axle - Rear Hub | Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: FTC3188 - Rear Stub Axle
FTC3188 is a rear stub axle that locates the rear hub on the axle and provides the mounting face for the wheel bearings and hub flange. The stub axle forms the interface between the wheel hub and the rear axle assembly, supplying the machined seats and flange surface that locate wheel bearings and the hub. It transfers vertical and lateral loads from the wheel into the axle structure and, on driven rear axles, aligns with the hub to accept rotational loads through the bearing assembly. Correct seating and undamaged flange faces are essential for accurate wheel alignment and bearing life; the stub axle must match the axle housing and hub dimensions used on the specific model and VIN range.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - From VIN LA930456
- Discovery 1 (1989-1998) - From VIN FA393361 to WA799999
- Range Rover Classic (1992-1994) - From VIN JA610294
- Range Rover Classic (1992-1994) - From VIN JA624517
Frequently Asked Questions
FTC3188 positions and supports the rear wheel hub, providing the machined seats and flange used to locate wheel bearings and the hub flange. It carries vertical and lateral loads into the axle and, where applicable on driven axles, aligns the hub so rotational loads pass correctly through the bearing assembly. Damaged seating or flange faces will shorten bearing life and affect wheel alignment, so replacements must match the axle housing and hub dimensions for the vehicle's VIN range.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | Hubs & Driveshafts - From VIN LA930456 |
| Land Rover Discovery 1 (1989-1998) | CLASSIC (L318) Hubs And Driveshafts - From VIN FA393361 to WA799999 |
| Land Rover Range Rover Classic (1992-1994) | CLASSIC Hubs And Driveshafts (4 Wheel Anti-Lock Braking System) - From VIN JA610294 |
| Land Rover Range Rover Classic (1992-1994) | CLASSIC Hubs And Driveshafts (Less Anti-Lock Braking System) - From VIN JA624517 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.