FTC3581 | Selector Fork 1st/2nd - R380 5-speed manual | Defender, Discovery, Range Rover
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: FTC3581 - 1st and 2nd Gear Selector Fork
FTC3581 is a 1st and 2nd gear selector fork for the R380 5-speed manual transmission. Fitted on the gearbox selector shaft, it locates against the selector sleeve shoulder and runs in the fork rail or guide to position the selector sleeve over the 1st and 2nd gear dogs, allowing positive engagement and disengagement of those gears. Hardened contact faces and correct fork geometry maintain accurate axial movement and dog alignment; replacement is required where the fork shows wear, bending or damaged contact surfaces that prevent positive engagement or cause gear crunching. This assembly is specific to the R380 5-speed manual gearbox design and is intended for use in Land Rover models carrying that gearbox specification.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - From 300Tdi era onwards
- Discovery 1 (1989-1998) - From VIN FA393361 to WA799999
- Discovery 2 (1998-2004)
- Range Rover Classic (1992-1994) - From VIN JA610294
- Range Rover P38
Frequently Asked Questions
The FTC3581 selector fork locates on the gearbox selector shaft and interfaces with the selector sleeve to translate shifter movement into engagement of 1st and 2nd gears. It bears against the selector sleeve shoulder and runs in the fork rail or guide; hardened contact faces and correct fork geometry ensure accurate axial movement and dog alignment. Common failure modes are wear, bending or damaged contact faces that prevent positive engagement or cause gear crunching, in which case the fork must be replaced.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | Selectors & Shafts (L315) - 5 Speed Manual Transmission |
| Land Rover Discovery 1 (1989-1998) | Selectors & Shafts - From VIN FA393361 to WA799999 (L318) - Manual Transmission |
| Land Rover Discovery 2 (1998-2004) | Selectors & Shafts (L318) - 5 Speed Manual Transmission |
| Land Rover Range Rover Classic (1992-1994) | Selectors & Shafts - From VIN JA610294 - Manual Transmission |
| Land Rover Range Rover P38 | Selectors & Shafts |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the selector fork if inspection shows wear, bending or damaged contact faces that prevent positive engagement or cause grinding when selecting 1st or 2nd gear. It should also be inspected during any gearbox service if shifting becomes stiff, noisy or imprecise.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.