FTC5202 | Clutch Slave Cylinder - R380, 300Tdi, Td5 | Defender, Discovery 2
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: FTC5202 - Clutch Slave Cylinder - R380 - 300Tdi & Td5
FTC5202 is a clutch slave cylinder fitted to the clutch release mechanism on vehicles with the R380 5-speed manual transmission. The slave cylinder converts hydraulic pressure from the clutch master cylinder into linear motion to operate the clutch release fork or concentric release bearing, allowing the clutch to disengage for gear changes. This part is specified for vehicles using the 300Tdi and Td5 powertrains where the R380 gearbox is fitted, commonly found on Defender and Discovery 2 models. It forms part of the clutch hydraulic circuit and should be matched to the correct transmission and engine combination; replacement is performed when the cylinder shows external fluid leakage or loss of clutch hydraulic function.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1994-2006) - 300Tdi, Td5
- Discovery 2 - 300Tdi, Td5
Frequently Asked Questions
The FTC5202 slave cylinder converts hydraulic pressure from the clutch master cylinder into linear motion to operate the clutch release fork or concentric release bearing on R380 5-speed gearboxes, allowing the clutch to disengage for gear changes. It is specified for vehicles using the 300Tdi and Td5 powertrains when the R380 gearbox is fitted and is replaced if external fluid leakage or loss of clutch hydraulic function is present.
| Model | Variant |
|---|---|
| Land Rover Defender (1987 - 2006) | Clutch Release Mechanism (2.5 Tdi Non EEGR (Gem); 2.5L 5 Cyl Diesel; 2.5L 5 Cyl L/R Diesel; 5 Speed Manual Transmission, TDi) |
| Land Rover Discovery 2 | 300Tdi, Td5 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replacement is required when the cylinder shows external fluid leakage or there is loss of clutch hydraulic function; inspect the clutch hydraulic system if these symptoms occur and replace the slave cylinder as necessary.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.