ICB500030 | Front Output Shaft Housing - LT230 Transfer Box | Defender, Discovery 2
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: ICB500030 - Front Output Shaft Housing
ICB500030 is a Front Output Shaft Housing for the LT230 transfer box. The housing locates and supports the front output shaft and provides a sealed bearing support and machined mounting face. It aligns the shaft with the transfer box internals, transfers radial and axial loads into the transfer box casing, and its machined bore and flange positions accept the bearings, seals and fasteners required for the front output. As a structural element of the front drive output assembly on LT230-equipped Defender and Discovery 2 models, the housing is replaced when damaged, worn or when seal and bearing surfaces require renewal.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - LT230 Transfer Box
- Discovery 2 (1998-2004) - LT230 Transfer Box
Frequently Asked Questions
ICB500030 locates and supports the front output shaft within the LT230 transfer box and provides a sealed bearing support and machined mounting face. It aligns the shaft concentric to the internal gearset and transfers radial and axial loads into the transfer box casing. The housing's machined bore and flange accept the bearings, seals and fasteners required for the front output; replace if bearing or seal surfaces are damaged or worn.
| Model | Variant |
|---|---|
| Land Rover Defender | 1987-2006 - LT230 Transfer Box (Front Housing, L315) |
| Land Rover Discovery 2 | 1998-2004 - LT230 Transfer Box (Front Housing, L318) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the housing when it is damaged, worn or when the seal or bearing surfaces require renewal. Inspect the front output assembly during transfer box servicing to determine if replacement is necessary.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.