JHB000060 | Coolant Inlet Hose - Heater Matrix - Td5 | Discovery 2
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: JHB000060 - Coolant Inlet Hose - Heater Matrix
JHB000060 is a coolant inlet hose for the heater matrix fitted to Td5 engines. It routes engine coolant into the heater matrix inlet and forms part of the vehicle heating circuit, ensuring warm coolant reaches the heater core for cabin heating. The hose must be installed with correct clamps and routing to maintain heater performance and prevent coolant loss.
Compatibility
- Discovery 2 (1998-2004) - Td5 (From VIN YA277554)
Frequently Asked Questions
JHB000060 carries engine coolant from the engine to the heater matrix inlet on Td5 engines, allowing the heater core to provide warm air to the cabin. A failed hose can cause coolant leaks or reduced heater performance, so check for cracks, soft spots, swelling or loose clamps during inspection.
| Model | Variant |
|---|---|
| Land Rover Discovery 2 (1998-2004) | Td5 - 2.5L 5 Cyl Diesel (From VIN YA277554) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the hose at every service and replace it if it shows cracking, swelling, softening, or any evidence of coolant leakage; replace immediately if leaking to prevent coolant loss and overheating.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.