LGH10064L | Cylinder Head Inlet Valve - 2.5 KV6 Petrol | Freelander 1996-2006
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LGH10064L - Cylinder Head Inlet Valve
LGH10064L is a cylinder head inlet valve for the 2.5 KV6 petrol engine. Fitted into the cylinder head and actuated by the camshaft, it controls the intake port to admit the engine's air-fuel charge.
The inlet valve forms the moving seal between the cylinder head intake port and the combustion chamber: it opens under camshaft lift to allow the air-fuel mixture into the cylinder and then seats to maintain compression during the compression and power strokes. Valves operate in a high-temperature, high-pressure environment and on the Freelander 2.5 KV6 can suffer wear such as seat recession, pitting or stem wear, which may affect running quality and compression. Replacement valves are typically fitted as part of a cylinder head overhaul or valve service when the existing valve no longer meets seating or dimensional tolerances.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Freelander (1996-2006) - 2.5 KV6 Petrol
Frequently Asked Questions
The LGH10064L inlet valve seals the cylinder head intake port and opens under camshaft lift to admit the air-fuel mixture, then seats to maintain cylinder compression during the compression and power strokes. Valves run under high temperature and pressure and on the 2.5 KV6 commonly suffer seat recession, pitting or stem wear, which can lead to poor running and loss of compression. When valves no longer meet seating or dimensional tolerances they are typically replaced as part of a cylinder head overhaul or valve service.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996-2006) | 2.5 KV6 Petrol, Automatic Transmission |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the inlet valve when it no longer achieves a proper seat or when inspection during a cylinder head service reveals excessive wear such as seat recession, pitting or stem damage. If unsure, follow the vehicle's service manual or seek professional inspection.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.