LHG100750L | Crankshaft Torsional Vibration Damper | Freelander 1
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LHG100750L - Crankshaft Torsional Vibration Damper
LHG100750L is a crankshaft torsional vibration damper fitted to the front of the crankshaft on the Td4 M47 2.0L I4 16V diesel engine. This damping assembly, often called a harmonic balancer, reduces the amplitude of torsional pulses generated during crankshaft rotation and, where applicable, acts as the drive pulley for accessory belts. Correct damping lowers peak loads transmitted into the crankshaft, timing drive and accessory drive components; when fitting, ensure the unit is secure and correctly aligned, and routinely inspect for visible cracking, oil contamination or play at the hub during engine service intervals.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Freelander 1 (1996-2006) - M47 2.0L I4 16V Diesel (Td4)
Frequently Asked Questions
LHG100750L is a crankshaft damping assembly (harmonic balancer) that reduces torsional pulses from the crankshaft and serves as the drive pulley for accessory belts where fitted. By dampening these vibrations it helps protect the crankshaft, timing drive and accessory drive components from peak load stress. Inspect the unit for cracking, oil contamination or play at the hub and ensure correct alignment when fitting to avoid belt mis-tracking.
| Model | Variant |
|---|---|
| Land Rover Freelander 1 (1996-2006) | M47 2.0L I4 16V Diesel (Td4) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the damper at routine engine service intervals and replace if there is visible cracking, oil contamination or noticeable play at the hub; ensure correct fit and alignment when installing a replacement. Consult a technician or the vehicle handbook if unsure.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.