LHP100550L | Rear Camshaft Tensioner Pulley - 2.0L TCIE | Freelander 1996-2006
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LHP100550L - Rear Camshaft to Injector Pump Tensioner Pulley
LHP100550L is a rear camshaft to injector pump tensioner pulley fitted to the rear camshaft drive route on 2.0 L Series (2.0L I4 8V TCIE) diesel Freelander 1 engines. The pulley keeps the injection-pump drive belt at the correct operating tension and helps maintain belt alignment at the rear of the cylinder head, preventing belt slip and reducing wear on the belt and associated pulleys. Replacement is commonly carried out during timing or injection drive belt service or when the pulley bearings show noise or radial play; the component fits the rear camshaft-injector pump drive assembly and should be fitted in its intended position without modification. For inspection, check for bearing noise, radial play and belt tracking prior to fitting a new unit. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Freelander (1996-2006) - 2.0 L Series (2.0L I4 8V TCIE)
Frequently Asked Questions
The LHP100550L maintains correct tension and alignment of the belt between the rear camshaft and the injector pump on 2.0 L Series Freelander engines. Common failure signs are bearing noise, radial play or poor belt tracking, which can cause belt slip and accelerated wear. It is a direct-fit component of the rear camshaft-injector pump drive assembly and must be installed in its intended position without modification.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996-2006) | 2.0 L Series (2.0L I4 8V TCIE) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the LHP100550L during timing or injection drive belt service, or sooner if bearing noise, radial play or poor belt tracking are detected. If in doubt, consult the vehicle service manual or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.