LKJ000070 | EGR Valve to Inlet Manifold O-Ring - 3.0 Td6 | Range Rover L322
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LKJ000070 - EGR Valve to Inlet Manifold O-Ring
LKJ000070 is an EGR valve to inlet manifold O-ring. Fitted between the EGR valve and the inlet manifold on Range Rover L322 models with the 3.0 Td6 engine, it provides a sealed joint to prevent exhaust gas leakage at the connection.
Compatibility
- Range Rover L322 (to 2006) - 3.0 Td6
Frequently Asked Questions
LKJ000070 seals the joint between the EGR valve and the inlet manifold on Range Rover L322 3.0 Td6 engines. By forming a gas-tight seal it prevents exhaust gases leaking at the connection and should be inspected whenever the EGR valve is removed.
| Model | Variant |
|---|---|
| Land Rover Range Rover L322 (to 2006) | 3.0 Td6 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the o-ring whenever the EGR valve is removed or during routine servicing; replace it if it shows signs of hardening, cracking or leaking to avoid EGR and inlet tract issues.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.