LR004489 | Exhaust Manifold - 2.4L Duratorq-TDCi, 140PS | Defender (2007-2016)
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR004489 - Exhaust Manifold
LR004489 is an exhaust manifold fitted to the 2.4L Duratorq-TDCi HPCR 140PS engine used in Defender models. The manifold collects exhaust gases from the cylinder head ports and combines them into a single outlet, providing the flange and mounting interface for the turbocharger or exhaust downpipe and sealing to the cylinder head with a manifold gasket. It is designed to operate under high temperature and vibration and must resist thermal stress and exhaust pressure; correct sealing at the cylinder head is required to prevent exhaust leaks. During removal or installation, the manifold-to-head studs and the outlet flange fasteners should be inspected for corrosion or distortion and replaced if necessary to achieve a reliable seal.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (2007-2016) - 2.4L Duratorq-TDCi HPCR 140PS - From VIN 7A000001 to TOBA999999
Frequently Asked Questions
The LR004489 exhaust manifold gathers exhaust flow from the cylinder head ports and directs it into the downstream exhaust system, forming the single outlet for downstream components. It also provides the flange and mounting interface for the turbocharger or exhaust downpipe and must seal to the cylinder head with a manifold gasket. Inspect the manifold-to-head studs and outlet flange fasteners during removal or installation and replace any corroded or distorted items to maintain a reliable seal.
| Model | Variant |
|---|---|
| Land Rover Defender (2007-2016) | 2.4L Duratorq-TDCi HPCR 140PS - From VIN 7A000001 to TOBA999999 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace LR004489 if it cannot achieve a reliable seal to the cylinder head or if the manifold-to-head studs or outlet flange fasteners are corroded, distorted or otherwise damaged. Inspect the manifold during removal or routine service and replace where defects are found.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.