LR014290 | Clutch Slave Cylinder - 6 Speed Manual | Discovery 3, Discovery 4
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR014290 - Clutch Slave Cylinder - 6 Speed Manual
LR014290 is a Clutch Slave Cylinder for 6-speed manual gearboxes. Fitted within the clutch hydraulic system, this slave cylinder converts hydraulic pressure from the clutch master cylinder into linear movement that actuates the clutch release mechanism; its piston pushes the release bearing or clutch fork to disengage the clutch when the pedal is depressed. Correct operation of the slave cylinder is important for a consistent pedal feel and reliable clutch engagement on Discovery models equipped with 6-speed manual transmissions. Always confirm fitment against your V.I.N. using the compatibility information below.
Compatibility
- Discovery 3 - 2.7 TDV6 (From VIN 9A507558)
- Discovery 4 (2010-2016) - 6 Speed Manual ZF S6-53 (From VIN AA000001)
Frequently Asked Questions
LR014290 converts hydraulic pressure from the clutch master cylinder into linear motion that operates the clutch release mechanism; the slave cylinder's piston pushes the release bearing or clutch fork to disengage the clutch. A faulty unit can cause a spongy pedal, clutch slipping or difficulty selecting gears, so prompt replacement on failure maintains reliable gear changes.
| Model | Variant |
|---|---|
| Land Rover Discovery 3 | 2.7 TDV6 (From VIN 9A507558) |
| Land Rover Discovery 4 (2010-2016) | 6 Speed Manual ZF S6-53 (From VIN AA000001) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the slave cylinder if there are signs of hydraulic fluid leakage, a spongy or sinking clutch pedal, or difficulty engaging gears. Inspect the clutch hydraulic system when performing clutch or transmission work and renew the cylinder if any fault is detected; consult the vehicle handbook or a qualified technician for specific guidance.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.