LR017953 | Rear Solid Brake Disc - 290mm | Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR017953 - Rear Solid Brake Disc - 290mm diameter, 12.6mm thickness
LR017953 is a rear solid (non-vented) brake disc used on the rear braking assembly to provide the machined friction surface for the brake pads during deceleration. This disc replaces earlier part number FTC1381 and is specified as the matching rotor for rear pad sets referenced by SFP000270. New thickness is 12.6mm with a discard dimension at 11.7mm, and the total height including the hub boss is 61.5mm. These discs locate on the rear hub boss and align with the wheel and caliper assembly; regular inspection of the disc surface and thickness is recommended to maintain braking performance.
Please note: These discs and pads will not fit on the 110 and 130 models. Critical dimensions are 290mm diameter, 12.6mm thickness (replace at 11.7mm) and total height including hub boss 61.5mm.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender - From VIN 9A777777
- Defender 90 - To VIN 9A777776
- Discovery 1
- Range Rover Classic
Frequently Asked Questions
LR017953 provides the machined friction surface for the rear brake pads as a solid (non-vented) rotor. It replaces earlier part FTC1381 and is specified to match rear pad sets SFP000270. Inspect the disc surface and measure thickness frequently - new 12.6mm, discard at 11.7mm - to ensure safe braking performance.
| Model | Variant |
|---|---|
| Land Rover Defender (2007 - 2016) | Rear Brake Discs And Calipers (4 Wheel Anti-Lock Braking System) (VIN FROM7A000001) |
| Land Rover Defender | From VIN 9A777777 |
| Land Rover Defender 90 | To VIN 9A777776 |
| Land Rover Discovery 1 | |
| Land Rover Range Rover Classic |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace as soon as there is a large lip indicating excess wear, if thickness is at or below the discard dimension (11.7mm), or if warping is detected during inspection or test drive; inspect braking components thoroughly to determine the cause of uneven wear.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.