LR024833 | Flywheel and Ring Gear - 2.7 TDV6 | Discovery 3, Discovery 4
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR024833 - Flywheel and Ring Gear
LR024833 is a Flywheel and Ring Gear. Fitted to 2.7 TDV6 manual engines, this flywheel assembly transfers engine torque to the manual gearbox and incorporates the ring gear for starter engagement. The machined flywheel face provides the mounting surface for the clutch friction plate and pressure plate, and the unit's mass helps smooth engine speed fluctuations during clutch engagement. The bolted ring gear around the circumference engages with the starter motor pinion to crank the engine; correct tooth profile and concentricity are necessary for reliable starter engagement. When replacing the clutch or gearbox, inspect the flywheel face for scoring or heat damage and ensure correct alignment to the crankshaft flange and the specified bolt tightening sequence and torque values for the 2.7 TDV6 crank assembly.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 3 - 2.7 TDV6 - Manual gearbox
- Discovery 4 - 2.7 TDV6 - Manual gearbox
Frequently Asked Questions
The LR024833 flywheel and ring gear form the mechanical interface between the 2.7 TDV6 engine and a manual transmission. The machined face provides the clutch mounting surface while the flywheel's mass smooths engine speed during engagement. The bolted ring gear allows the starter pinion to crank the engine; correct tooth profile and concentricity are required for reliable starter operation.
| Model | Variant |
|---|---|
| Land Rover Discovery 3 | 2.7 TDV6 - Manual gearbox |
| Land Rover Discovery 4 | 2.7 TDV6 - Manual gearbox |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the flywheel if the face shows scoring or heat damage, or if it adversely affects clutch release geometry; inspect the unit whenever the clutch or gearbox is removed. When unsure, consult the vehicle service manual or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.