LR029301 | Right-Hand Lower Front Suspension Wishbone - Range Rover Sport 2010-2013
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR029301 - Right-Hand Lower Front Suspension Wishbone
LR029301 is a right-hand lower front suspension wishbone fitted to the front suspension of Range Rover Sport L320 models. The wishbone locates the wheel hub laterally and transmits vertical and braking loads between the wheel knuckle and the vehicle subframe. Rubber-mounted bushings at the chassis end allow controlled movement while isolating road noise; worn bushes commonly produce knocking noises over uneven surfaces or during low-speed braking. The arm retains camber and toe settings under load and resists fore-aft forces generated during acceleration and braking. It is designed for press-fit bushes and specific securing hardware, so replacing the complete wishbone usually restores correct suspension geometry more easily than attempting to replace only the bush.
Please note: For a bolt kit use DA7205.
Compatibility
- Range Rover Sport (2010-2013) - From VIN AA000001
Frequently Asked Questions
The LR029301 right-hand lower front suspension wishbone is a primary structural arm that locates the front wheel hub laterally and transfers vertical and braking loads between the wheel knuckle and the vehicle subframe. Rubber-mounted bushes allow controlled movement while isolating road noise; worn bushes commonly cause knocking noises. The arm also retains camber and toe settings under load and is designed for press-fit bushes and specific securing hardware, so fitting the complete wishbone is generally recommended over attempting to replace only the bush.
| Model | Variant |
|---|---|
| Land Rover Range Rover Sport (2010-2013) | Front Susp.Arms/Stabilizer/X-Member (Front Upper And Lower Arms) - From VIN AA000001 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.