LR030745 | Upper Engine Mount - 2.0 TIVCT Petrol | Range Rover Evoque
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR030745 - Upper Engine Mount
LR030745 is an Upper Engine Mount. Fitted within the engine and transmission mountings on 2.0 TIVCT petrol models, this upper mount secures the engine to the vehicle body, locates the top of the power unit and transmits engine loads into the body while isolating vibration. The component combines a metal carrier with a bonded elastomer insulator to control fore-aft and rotational movement, helping to maintain driveline geometry and reduce noise; installation aligns the mount to the factory locating points and fastener pattern used on Evoque L538 models with the specified 2.0L TIVCT petrol engines. Replacement is required where the bonded elastomer shows separation, severe cracking, or where excessive engine movement is observed.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Range Rover Evoque (2012-2018) (L538) - 2.0L 16V TIVCT T/C 240PS Petrol
- Range Rover Evoque (2012-2018) (L538) - 2.0L 16V TIVCT T/C Gen2 Petrol
Frequently Asked Questions
The LR030745 upper engine mount locates the top of the power unit and transmits engine loads into the body while isolating vibration. Its metal carrier bonded to an elastomer insulator controls fore-aft and rotational movement under drive and idle, helping to maintain driveline alignment and protect ancillary connections. Inspect for elastomer separation, severe cracking or excessive engine movement as signs of failure.
| Model | Variant |
|---|---|
| Land Rover Range Rover Evoque (2012-2018) (L538) | 2.0L 16V TIVCT T/C 240PS Petrol, Halewood (UK) |
| Land Rover Range Rover Evoque (2012-2018) (L538) | 2.0L 16V TIVCT T/C Gen2 Petrol, Halewood (UK) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the mount where the bonded elastomer shows separation, severe cracking, or if excessive engine movement is observed. Inspect the mount during routine services or after impacts to the powertrain and replace if these defects are present.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.