LR035555 | Idler Pulley with Bracket - 5.0 V8 | Discovery 4, Range Rover L322/L405
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR035555 - Idler Pulley with Bracket - Auxiliary Drive Belt - 5.0 NA V8
LR035555 is an idler pulley with bracket for the secondary auxiliary drive belt on 5.0 NA V8 (AJ133) engines. Fitted to the engine accessory drive area, the pulley and its mounting bracket locate the secondary auxiliary drive belt within the accessory drive circuit and carry the bearing assembly that permits rotation under belt load. Correct alignment from this assembly prevents lateral belt movement and helps maintain consistent belt tracking; replacement may be required if the bearing becomes noisy or the bracket is damaged.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 4 (2010-2016) - 5.0 NA V8 (From VIN AA000001)
- Range Rover L322 (2010-2012) - 5.0 NA V8 (From VIN AA000001)
- Range Rover L405 - 5.0 NA V8 (To VIN FA999999)
- Range Rover Sport L320 (2010-2013) - 5.0 NA V8 (From VIN AA000001)
Frequently Asked Questions
The LR035555 idler pulley with bracket guides and locates the secondary auxiliary drive belt on 5.0 NA V8 (AJ133) engines, securing correct belt alignment and carrying the rotating bearing. Common failure modes are bearing noise or play and physical damage to the bracket; these issues can cause poor belt tracking and should prompt replacement.
| Model | Variant |
|---|---|
| Land Rover Discovery 4 (2010-2016) | 5.0L OHC SGDI NA V8 (AJ133) (From VIN AA000001) |
| Land Rover Range Rover L322 (2010-2012) | 5.0L OHC SGDI NA V8 (AJ133) (From VIN AA000001) |
| Land Rover Range Rover L405 | 5.0 NA V8 (To VIN FA999999) |
| Land Rover Range Rover Sport L320 (2010-2013) | 5.0L OHC SGDI NA V8 (AJ133) (From VIN AA000001) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the idler pulley assembly during routine belt or accessory drive services and replace the assembly if the bearing is noisy, shows excessive play, or the bracket is bent or damaged. If in doubt consult the vehicle handbook or a qualified technician.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.