LR035556 | Tensioner Pulley with Idler - AJ-V6 & AJ-V8 | Discovery 4, Range Rover
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR035556 - Tensioner Pulley with Idler Assembly
LR035556 is a tensioner pulley with an integral idler assembly. Fitted to the accessory (secondary) drive of supercharged 3.0 AJ-V6 and 5.0 AJ-V8 engines, it routes the auxiliary drive belt, maintains correct belt tension via the primary tensioner and positions the belt using the attached idler to ensure consistent tracking over accessory pulleys.
Please note: This pulley set up requires the 1444MM auxiliary drive belt.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 4 (2010-2016) - 3.0S AJ-V6 (From VIN EA000001 to VIN GA808634)
- Range Rover (2010-2012) - 5.0S AJ-V8 (From VIN CA393570)
- Range Rover (2013-2022) - 3.0S AJ-V6 (From VIN EA000001 to VIN GA275600)
- Range Rover (2013-2022) - 5.0S AJ-V8 (To VIN GA275600)
- Range Rover Sport (2010-2013) - 5.0S AJ-V8 (From VIN DA000001)
- Range Rover Sport (2014-2022) - 3.0S AJ-V6 (To VIN GA645746)
- Range Rover Sport (2014-2022) - 5.0S AJ-V8 (To VIN GA573275)
Frequently Asked Questions
LR035556 provides both tensioning and belt routing for the accessory drive on supercharged 3.0 AJ-V6 and 5.0 AJ-V8 engines. The primary tensioner maintains the correct belt tension while the attached idler positions the belt over accessory pulleys; common issues are bearing wear or seizing which can cause belt noise, mis-tracking or belt failure. Inspect the assembly during auxiliary belt replacement or if noise or abnormal belt wear develops.
| Model | Variant |
|---|---|
| Land Rover Discovery 4 | 2010-2016 - 3.0S AJ-V6 (From VIN EA000001 to VIN GA808634) |
| Land Rover Range Rover | 2010-2012 - 5.0S AJ-V8 (From VIN CA393570) |
| Land Rover Range Rover | 2013-2022 - 3.0S AJ-V6 (From VIN EA000001 to VIN GA275600) |
| Land Rover Range Rover | 2013-2022 - 5.0S AJ-V8 (To VIN GA275600) |
| Land Rover Range Rover Sport | 2010-2013 - 5.0S AJ-V8 (From VIN DA000001) |
| Land Rover Range Rover Sport | 2014-2022 - 3.0S AJ-V6 (To VIN GA645746) |
| Land Rover Range Rover Sport | 2014-2022 - 5.0S AJ-V8 (To VIN GA573275) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the tensioner and idler whenever the auxiliary belt is replaced or during scheduled services; replace the assembly if the pulley bearing is noisy, shows play, seizes, or if the idler or mounting is damaged. If unsure, consult the vehicle handbook or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.