LR039528 | Transfer Box Rear Output Flange Kit - ZF 6HP, 8HP | Discovery, Range Rover
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LR039528 - Transfer Box Rear Output Flange Kit
LR039528 is a Transfer Box Rear Output Flange Kit. Fitted to the rear output shaft of the transfer box, this flange kit provides the mechanical interface for the rear propshaft and secures the propshaft flange to the transfer box output. It transfers drive torque from the transfer drive to the rear driveline, locates and retains the rear propshaft flange and manages rotational loads and alignment across the joint. Supplied as a kit to replace the flange and associated interface parts during repair or overhaul, correct flange condition and secure fastenings reduce propshaft vibration and maintain driveline geometry. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 4 (2010-2016) - Transfer drive components (ZF 6HP26, ZF 6HP28, ZF 8HP70, ZF S6-53 manual)
- Discovery 5 (2017- ) - Transfer drive components (1-speed transfer case)
- Range Rover (2013-2022) - Transfer drive components (1-speed or 2-speed transfer case)
- Range Rover Sport (2010-2013) - Transfer drive components (ZF 6HP26, ZF 6HP28, ZF 8HP70)
- Range Rover Sport (2014-2022) - Transfer drive components (ZF 8HP45, ZF 8HP70 4WD, ZF 8HP70 HEV 4WD)
Frequently Asked Questions
The LR039528 kit provides the mechanical interface between the transfer box rear output and the rear propshaft, transferring drive torque into the rear driveline. Supplied as a kit to replace the flange and associated interface parts, it helps maintain correct alignment and manage rotational loads; worn or loose flanges commonly cause driveline play, vibration or noise. Confirm the flange matches the vehicle's transfer case and transmission before fitting.
| Model | Variant |
|---|---|
| Land Rover Discovery 4 (2010-2016) | Transfer Drive Components - ZF 6HP26, ZF 6HP28, ZF S6-53 manual, ZF 8HP70; 1-speed or 2-speed transfer cases |
| Land Rover Discovery 5 (2017 - ) | Transfer Drive Components - With 1 Speed Transfer Case (Solihull Plant Build) |
| Land Rover Range Rover (2013-2022) | Transfer Drive Components - With 1 Speed Transfer Case (Solihull Plant Build) or With 2 Spd Trans Case With Ctl Trac |
| Land Rover Range Rover Sport (2010-2013) | Transfer Drive Components - ZF 6HP26, ZF 6HP28, ZF 8HP70 |
| Land Rover Range Rover Sport (2014-2022) | Transfer Drive Components - ZF 8HP45, ZF 8HP70 4WD, ZF 8HP70 HEV 4WD; with 1-speed or 2-speed transfer case (incl. Solihull Plant Build variants) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the flange during any transfer box, propshaft or driveline service and replace if there is visible wear, movement at the flange, damaged bolt threads or persistent vibration/noise. Because the kit replaces interface parts, have replacement carried out or checked by a qualified technician to ensure correct driveline alignment.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.