LSB102610 | Engine Oil Sump - 300Tdi | Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: LSB102610 - Engine Oil Sump
LSB102610 is an engine oil sump for the 2.5L 300Tdi diesel engine. Fitted at the base of the engine, the sump forms the oil reservoir and locates the oil pick-up, holding lubricating oil between pump cycles to ensure continuous circulation while the engine runs and when stationary. Replacement is required where the sump is dented, corroded or otherwise compromised, as damage can reduce oil capacity or allow external leakage. The part applies to 300Tdi installations on Defender and Range Rover Classic models and to Discovery 1 300Tdi units from unit 21L88229A.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - 300Tdi
- Discovery 1 - 300Tdi (From unit 21L88229A)
- Range Rover Classic (1992-1994) - 300Tdi (From unit JA610294)
Frequently Asked Questions
The LSB102610 engine oil sump collects and stores the engine's lubricating oil and positions the oil pick-up for the lubrication system. It maintains oil supply between pump cycles to support continuous circulation when the engine is running and when stationary. Common causes for replacement are dents, corrosion or external leaks; inspect the sump during oil services and replace if capacity or sealing is compromised.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | 2.5L I4 300 TDi Diesel Turbo (L315) |
| Land Rover Discovery 1 | 300Tdi (From unit 21L88229A) |
| Land Rover Range Rover Classic (1992-1994) | 2.5L TDi (From JA610294) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the sump during routine oil services and replace it if it is dented, corroded or leaking, or if oil capacity is noticeably reduced. If in doubt, consult the vehicle service manual or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.