MWC9060 | Right-Hand Inner Sill - Rear Bodyside | Discovery 1 1989-1998
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: MWC9060 - Right-Hand Inner Sill (3/5 Door)
MWC9060 is a right-hand inner sill for 3- and 5-door bodyshells. Fitted to the inner bodyside at the rear end of the body, this panel sits behind the outer sill and beneath the door aperture, providing a load-bearing flange for attaching trims, seals and the outer sill while forming the internal surface that limits ingress of water and debris. It is commonly replaced during body repair or restoration where corrosion has penetrated the lower bodyside; replacement typically requires panel alignment, weld or panel-bond attachment and finishing with seam sealer and corrosion protection. The inner sill also helps maintain correct geometry of the door threshold and lower bodyside when new outer panels or door components are fitted. This part is specific to 3- and 5-door bodyshell configurations and must match the vehicle's rear bodyside layout for correct fitment.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Land Rover Discovery 1 (1989-1998) - From VIN FA393361 to WA799999
Frequently Asked Questions
The MWC9060 right-hand inner sill forms the inner section of the lower bodyside at the rear end of the vehicle. It fits behind the outer sill and beneath the door aperture, providing a load-bearing flange for attaching trims, seals and the outer sill and helping to limit ingress of water and debris. It is typically replaced where corrosion has penetrated the lower bodyside during body repair or restoration.
| Model | Variant |
|---|---|
| Land Rover Discovery 1 (1989-1998) | Inner Bodyside Panels Rear End - From VIN FA393361 to WA799999 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the inner sill during body repair or restoration and replace when corrosion has penetrated the lower bodyside or when renewal of inner bodyside panels is required to restore structural geometry and sealing; ensure professional panel alignment, sealing and corrosion protection during installation.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
All products and accessories available on LRDirect.com come with a 2-year warranty.