MYX100180L | Inlet Manifold O Ring - 2.5 KV6 Petrol | Freelander (1996-2006)
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: MYX100180L - Inlet Manifold O Ring
MYX100180L is an inlet manifold O-ring used on the 2.5 KV6 petrol engine. It seals the inlet manifold joint to prevent air or vacuum leaks at the intake, helping to maintain correct air metering and engine response; fitted to Freelander models with the 2.5 KV6 petrol engine.
Compatibility
- Freelander (1996-2006) - 2.5 KV6 Petrol, Automatic Transmission
Frequently Asked Questions
MYX100180L is an O-ring that seals the inlet manifold joint on the 2.5 KV6 petrol engine to prevent air and vacuum leaks. A degraded or damaged O-ring can cause intake leaks and affect engine idle and performance, so it should be inspected for cracking, hardening or contamination and replaced if worn.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996-2006) | 2.5 KV6 Petrol - Automatic Transmission |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the O-ring during intake or routine engine servicing and replace if it shows signs of hardening, cracking, deformation or oil contamination. If intake leaks are suspected, replace the O-ring and recheck the intake sealing.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.