NRC2054 | Engine Mounting Round Type - 4cyl Petrol | Series 1-3
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: NRC2054 - Engine Mounting - Round Type
NRC2054 is an engine mounting - round type fitted to Land Rover Series vehicles. This mounting secures the engine to the chassis and absorbs vibration and movement under load; it is the larger round style used on Series models to locate the engine and reduce transmitted vibration to the vehicle structure. The rubber element isolates engine movement while the metal sleeve and nut fixings keep the unit aligned in its mounting points. Selection of the correct round type is important where chassis mounts and engine frame geometry match the larger-diameter design of this part. During operation the mounting compresses and flexes to absorb torque reactions and road-induced motion, reducing stress on mount brackets and adjacent components. Replacement is required when rubber deterioration, splitting or excessive free play is present, as progressive wear increases engine movement and can transfer loads to pipework, wiring and ancillaries. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Series 1
- Series 2 - 4cyl Petrol
- Series 2A
- Series 3 - 4cyl Petrol
Frequently Asked Questions
The NRC2054 is the larger round engine mounting used on Land Rover Series models to locate the engine and reduce transmitted vibration. Its rubber element isolates engine movement while the metal sleeve and nut fixings keep the unit aligned; the mount compresses and flexes to absorb torque reactions and road-induced motion. Replace the unit if the rubber is deteriorated, split or there is excessive free play, as worn mounts allow increased engine movement that can stress brackets, pipework, wiring and ancillaries.
| Model | Variant |
|---|---|
| Land Rover Series 1 | |
| Land Rover Series 2 | 4cyl Petrol |
| Land Rover Series 2A | |
| Land Rover Series 3 | 4cyl Petrol |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the mount during routine servicing and replace if the rubber shows deterioration, splitting or if there is excessive free play; worn mounts allow increased engine movement which can transfer loads to surrounding components. If any of these symptoms are present, fit a replacement to prevent further damage.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.