NRC4304 | Heavy-Duty Rear Coil Spring - Rear Suspension | Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: NRC4304 - Heavy-Duty Rear Coil Spring
NRC4304 is a heavy-duty rear coil spring fitted to the rear suspension. Specified for Range Rover Classic vehicles prepared for police use, this spring carries increased rear loads and sets the rear spring rate and ride height under load; it commonly reduces rear sag where heavier equipment or engines are fitted and can result in a raised front end on diesel conversions. Installation requires rear suspension disassembly and the safe use of a spring compressor-ensure the correct part number and orientation are used when refitting.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Range Rover Classic (1992-1994)
Frequently Asked Questions
The NRC4304 heavy-duty rear coil spring supports the vehicle's rear axle load and defines spring rate and ride height under load. It has a higher spring rate and load capacity than standard rear springs to reduce sag under heavy loads or when fitting heavier engines, and is commonly used alongside front-end raising to maintain vehicle attitude. Fitting requires rear suspension disassembly and the safe use of a spring compressor; confirm part number and orientation when refitting.
| Model | Variant |
|---|---|
| Land Rover Range Rover Classic (1992-1994) | From JA610294 - CLASSIC Bottom Link |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
All products and accessories available on LRDirect.com come with a 2-year warranty.