NRC6436 | Intermediate Exhaust Pipe - 2.25 & 2.5 4-cylinder | Defender 90/110
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: NRC6436 - Intermediate Exhaust Pipe - 4-Cylinder Pre Td
NRC6436 is an intermediate exhaust pipe for 4-cylinder pre-Td engines. Fitted in the exhaust system to join the front and rear sections, it connects the manifold/downpipe to the silencer/tailpipe on 2.25 and 2.5 naturally aspirated 4-cylinder engines fitted to Defender 90 and 110 models. The pipe locates between mating flanges and is retained with clamps or bolts and a gasket; it is exposed to high temperatures, moisture and road debris which can cause corrosion, perforation or flange distortion. A compromised intermediate pipe can produce exhaust leaks, increased noise and reduced routing efficiency, so replacement restores the correct exhaust path and sealing geometry - correct flange alignment and appropriate sealing hardware are required during installation to avoid leaks and maintain exhaust back-pressure characteristics.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender 90/110 (to 1987) - 2.25 and 2.5 naturally aspirated 4-cylinder (From VIN BA267063)
Frequently Asked Questions
The NRC6436 intermediate exhaust pipe joins the front and rear sections of the exhaust on 2.25 and 2.5 naturally aspirated 4-cylinder Defender engines, locating between mating flanges and secured with clamps or bolts and a gasket. It is exposed to heat, moisture and road debris which can lead to corrosion, perforation or flange distortion; common consequences of failure include exhaust leaks, increased noise and reduced routing efficiency. Replacement restores correct sealing geometry and exhaust routing; ensure correct flange alignment and sealing hardware during fitment to avoid leaks.
| Model | Variant |
|---|---|
| Land Rover Defender 90/110 (to 1987) | 2.25 and 2.5 naturally aspirated 4-cylinder (From VIN BA267063) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the intermediate pipe regularly and replace it if there are signs of corrosion, perforation, flange distortion or if an exhaust leak is present. Carry out inspections during routine services and whenever exhaust noise or fumes indicate a potential leak.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.