PBC000020 | Oil Cooler Assembly - 2.5 Diesel BMW M51 | Range Rover P38 1994-2001
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: PBC000020 - Oil Cooler Assembly
PBC000020 is an Oil Cooler Assembly - Engine. Fitted to Range Rover P38 models with the 2.5 Diesel (BMW M51) engine, this unit transfers heat from engine oil into the vehicle cooling circuit to control oil temperature during operation. Engine oil passes through a cooling core inside the assembly where heat is transferred to the coolant, helping to reduce oil temperature during sustained load or high ambient conditions. The assembly includes oil inlet and outlet connections and mounting points for attachment to the engine and coolant housings; external oil leaks, internal oil-coolant cross-contamination or a corroded cooling core indicate the unit requires replacement. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Range Rover P38 (1994-2001) - 2.5 Diesel (BMW M51)
Frequently Asked Questions
The PBC000020 oil cooler assembly transfers heat from engine oil into the vehicle cooling circuit so oil temperature is controlled during operation. Oil flows through a cooling core where heat passes to the coolant, reducing oil temperature under sustained load or high ambient conditions to limit viscosity loss and reduce thermal stress on lubricated components. The unit includes oil inlet and outlet connections and mounting points; external oil leaks, internal oil-coolant cross-contamination or a corroded core are common reasons for replacement.
| Model | Variant |
|---|---|
| Land Rover Range Rover P38 (1994-2001) | 2.5 Diesel (BMW M51) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the oil cooler during routine servicing and replace if there are signs of external oil leaks, internal oil-to-coolant contamination or a corroded cooling core. If in doubt, consult the vehicle service manual or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.