PBP500200 | Engine to Oil Cooler Pipe - 300Tdi | Defender 1987-2006
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: PBP500200 - Engine to Oil Cooler Pipe - 300Tdi
PBP500200 is an engine-to-oil-cooler pipe for 300Tdi engines. Fitted to vehicles with the 300Tdi, this pipe runs from the engine to the bottom of the oil cooler and provides the routed oil path required for the cooler to operate correctly. It should be inspected for signs of damage or leakage during routine servicing.
Compatibility
- Defender (1987-2006) - 300Tdi (From VIN MA939976)
Frequently Asked Questions
PBP500200 provides the oil connection between the engine and the lower port of the oil cooler on vehicles fitted with the 300Tdi. By routing engine oil through the cooler it helps control oil temperature; any damage or leaks to this pipe will reduce cooling effectiveness and may cause oil loss, so condition should be checked during servicing.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | 2.5L 4 Cyl 300Tdi (From VIN MA939976) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the Engine to Oil Cooler Pipe during routine services and replace it if there is visible corrosion, damage, cracking or any sign of oil leakage. Replace immediately if leaking to prevent engine oil loss and reduced cooling performance.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.