RGX100970 | Watts Linkage Bush - Rear Suspension - Discovery 2 1998-2004
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: RGX100970 - Watts Linkage Bush - Rear Suspension
RGX100970 is a Watts Linkage Bush for the rear suspension. Fitted to the Watts linkage on Discovery 2 models, this bushing is supplied as a press-fit component and should be handled as such during renewal.
Please note: This is a press-fit bushing; installation without a hydraulic press can be very difficult. A complete wishbone with the bushings pre-installed is available under part number RGD100550.
Compatibility
- Discovery 2 (1998-2004) - L318
Frequently Asked Questions
RGX100970 is a press-fit bushing for the Watts linkage on the rear suspension of Discovery 2 models. It serves as the replaceable wearing piece within the linkage and must be pressed into place; installing or removing it without a hydraulic press can be very difficult. For an alternative that avoids pressing in individual bushes, a complete wishbone with pre-installed bushes is available as RGD100550.
| Model | Variant |
|---|---|
| Land Rover Discovery 2 (1998-2004) | Radius Arm (L318) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.