RTC211720 | Big End Bearing Kit - 3.5L V8 | Defender, Discovery, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: RTC211720 - Big End Bearing Kit - 0.020 inch undersize - V8
RTC211720 is a set of 0.020 inch undersize connecting-rod big end half bearings for V8 engines. Supplied as a full set of conrod big end shells, this kit is used during reconditioning of Rover V8 engines fitted with Twin Carburettor or EFI induction systems to restore correct bearing clearance when crank journals have been machined undersize.
Compatibility
- Defender (1987-2006) - 3.5L V8 Twin Carb
- Discovery 1 (1989-1998) - 3.5L V8 Twin Carb and 3.5L V8 EFI
- Range Rover Classic (1986-1994) - 3.5L V8 Twin Carb and 3.5L V8 EFI
Frequently Asked Questions
RTC211720 provides replacement 0.020 inch undersize big end half-bearing shells for the connecting rods of Rover V8 engines. The shells replace worn or damaged bearing halves and are fitted when crank journals have been machined to the 0.020 inch undersize to restore the correct running clearance and oil film between rod and crankshaft.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | 3.5L V8 Twin Carb Petrol (L315) |
| Land Rover Discovery 1 (1989-1998) | 3.5L V8 Twin Carb Petrol (From FA393361 to WA799999, L318) |
| Land Rover Discovery 1 (1989-1998) | 3.5L V8 EFI Petrol |
| Land Rover Range Rover Classic (1986-1991) | V8 Twin Carb Petrol (to HA610293) |
| Land Rover Range Rover Classic (1986-1991) | V8 EFI Petrol (to HA610293) |
| Land Rover Range Rover Classic (1992-1994) | V8 EFI Petrol (from JA610294) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace these big end bearing shells when the engine is being reconditioned or if inspection reveals bearing wear, knocking or excessive clearance; they are fitted when crank journals have been machined to the 0.020 inch undersize. Consult a qualified technician or the workshop manual for measurement and fitting procedures.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.