SEG000030 | Front Right Hand Brake Caliper Housing - Discovery 2 1998-2004
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: SEG000030 - Front Right Hand Brake Caliper Housing
SEG000030 is a front right-hand brake caliper housing that locates the caliper pistons and provides the mounting points for the right-front caliper assembly on Discovery 2 vehicles. The housing forms the structural body of the caliper: it contains the piston bores, supports the brake pads, and provides the attachment faces and guide locations for the caliper mounting bolts and sliding pins. Loads generated during braking transfer through the housing into the steering knuckle or caliper bracket, so correct alignment with the rotor and pad faces is essential; the housing also provides the port for the brake hose connection and the sealing faces for dust boots and piston seals. Fitted to Discovery 2 models, this housing matches the right-hand front caliper arrangement and is identified for vehicles from chassis 3A000001 onwards where applicable.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 2 (1998-2004) - From chassis 3A000001 (right-hand front)
Frequently Asked Questions
SEG000030 provides the structural body for the right-front brake caliper on Discovery 2 vehicles, locating the pistons and supporting the brake pads. It supplies the attachment faces and guide locations for the caliper mounting bolts and sliding pins, includes the port for the brake hose connection, and provides sealing faces for dust boots and piston seals.
| Model | Variant |
|---|---|
| Land Rover Discovery 2 | 1998-2004 - From chassis 3A000001 (right-hand front) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.