SEG500050 | Left-Hand Front Brake Caliper - TDV6, V6, V8 | Discovery, Range Rover Sport
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: SEG500050 - Left-Hand Front Brake Caliper
SEG500050 is a left-hand front brake caliper assembly fitted to the front-left wheel. The caliper provides the mechanical interface between the hydraulic braking system and the front-left brake pads: when hydraulic pressure is applied the piston moves in its bore and forces the pads against the rotating brake disc to slow the vehicle. The assembly includes the piston bore, mounting points and hydraulic inlet specific to the left-front position; during replacement confirm the vehicle VIN and suspension/engine variant to ensure correct orientation and mounting. Brake hydraulic system bleeding and pad bedding should be carried out after installation following workshop practice.
SEG500050 is a Left-Hand Front Brake Caliper. This caliper applies hydraulic pressure to the front-left brake pads, clamping them onto the brake disc to slow the vehicle.
Use the compatibility data below to confirm fitment against your V.I.N. The corresponding right-hand caliper is part number SEG500040.
Compatibility
- Discovery 3 (2005-2009) - To VIN 9A999999
- Discovery 4 (2010-2016) - 2.7 TDV6 & 4.0 Cologne V6 (From VIN AA000001)
- Discovery 4 (2010-2016) - Standard Duty Coil Spring Suspension (From VIN DA000001)
- Range Rover Sport L320 (2005-2009) - 2.7 TDV6 & 4.4 AJ-V8 (To VIN 9A999999)
Frequently Asked Questions
SEG500050 is the left-hand front caliper assembly that converts hydraulic pressure into mechanical force to clamp the front-left brake pads onto the disc. It contains the piston bore, mounting points and hydraulic inlet specific to the left-front position; piston movement forces the pads against the rotating disc to reduce vehicle speed. When fitting, confirm VIN and suspension/engine variant for correct orientation and mounting, and perform brake system bleeding and pad bedding after installation.
| Model | Variant |
|---|---|
| Land Rover Discovery 3 | 2005-2009 - Front Brake Discs And Calipers (To VIN 9A999999) |
| Land Rover Discovery 4 | 2010-2016 - 2.7 TDV6 & 4.0 Cologne V6 (From VIN AA000001) |
| Land Rover Discovery 4 | 2010-2016 - Standard Duty Coil Spring Suspension (From VIN DA000001) |
| Land Rover Range Rover Sport L320 | 2005-2009 - 2.7 TDV6 & 4.4 AJ-V8 (To VIN 9A999999) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.