STC000160 | Clutch Slave and Master Cylinder Assembly - 1.8 K Series - Freelander
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: STC000160 - Clutch Slave and Master Cylinder Assembly - 1.8 K Series - Right-Hand Drive
STC000160 is a clutch slave and master cylinder assembly for 1.8 K Series right-hand drive Freelander 1 vehicles. Fitted to the clutch hydraulic system on manual-transmission models, the master cylinder converts pedal force into hydraulic pressure and the slave cylinder uses that pressure to actuate the clutch release mechanism at the transmission. The assembly is supplied prefilled and preassembled to match the hydraulic circuit layout used on the specified Freelander 1 models; check orientation and hydraulic line routing at fitment and follow standard clutch-bleeding procedures when installing.
Please note: For left-hand drive vehicles use part number STC000210L. Does not fit Td4 models.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Freelander (1996-2006) - 1.8 K Series - Manual transmission - Right-hand drive
Frequently Asked Questions
STC000160 contains the hydraulic master and slave cylinders required to operate the clutch on 1.8 K Series Freelander 1 right-hand drive manual-transmission vehicles. The master converts pedal input into hydraulic pressure and the slave transfers that pressure to disengage the clutch at the transmission. The assembly is supplied prefilled and preassembled to suit the vehicle hydraulic layout; confirm correct orientation and hose routing at fitment and bleed the system to remove air.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996-2006) Classic (L314) | 1.8 K Series - Manual transmission - Right-hand drive |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.