STC1172 | Cylinder Head Gasket Kit - 200Tdi | Defender, Discovery 1, Range Rover Classic
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: STC1172 - Cylinder Head Gasket Kit - 200Tdi
STC1172 is a cylinder head gasket kit for the 2.5 litre 200Tdi engine. It supplies the gaskets and seals required when rebuilding or resealing the cylinder head assembly; it does not include the main head gasket. This kit is intended to ensure all head mating surfaces and ancillary components are correctly sealed when the head is refitted during an overhaul or major service.
Compatibility
- Defender (1987-2006) - 200Tdi
- Discovery 1 - 200Tdi
- Range Rover Classic (1992-1994) - 200Tdi
Frequently Asked Questions
STC1172 supplies the supplementary gaskets and seals required when dismantling and reassembling the cylinder head on the 2.5 litre 200Tdi engine. The kit covers the smaller head seals and ancillary gaskets needed for a proper reseal but explicitly excludes the main head gasket. Using the full kit during a head rebuild helps ensure all mating faces are sealed correctly when the head is refitted.
| Model | Variant |
|---|---|
| Land Rover Defender | (1987-2006) - 2.5L I4 200 Tdi - L/R, 5-speed manual, less catalyst |
| Land Rover Discovery 1 | 200Tdi |
| Land Rover Range Rover Classic | (1992-1994) - 2.5L 200 Tdi (from JA610294) - 5-speed manual, less catalyst |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
The kit should be used whenever the cylinder head is removed for overhaul or repair; replace all gaskets during head reassembly to ensure correct sealing. If in doubt, consult the factory workshop manual or a qualified technician for guidance specific to the job.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.