STC1285 | Brake Master Cylinder Assembly - Non ABS - 300Tdi | Discovery 1 1994-1998
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: STC1285 - Brake Master Cylinder Assembly - Non ABS - 300Tdi
STC1285 is a Brake Master Cylinder Assembly (non-ABS) for the 300Tdi. Fitted to Discovery 1 300Tdi models built from VIN MA081992 where ABS was not fitted, the master cylinder converts brake pedal force into hydraulic pressure for the vehicle brake circuits. The assembly includes a fluid reservoir and internal pistons with seals and, as a non-ABS unit, supplies steady hydraulic pressure without modulation from anti-lock components. Typical reasons for replacement are external fluid leaks from the reservoir or body, internal seal wear causing a spongy pedal, or contamination of the hydraulic fluid; when replacing this component ensure the braking system is fully bled and the fluid level is correct to restore consistent pedal feel and braking response for the Discovery 1 300Tdi configuration.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 1 1994-1998 - 300Tdi (From VIN MA081992)
Frequently Asked Questions
The STC1285 master cylinder converts the mechanical force from the brake pedal into hydraulic pressure that is sent to the wheel brakes. It contains a fluid reservoir, pistons and seals; as a non-ABS unit it provides steady hydraulic pressure without anti-lock modulation. Common failure modes include external leaks, degraded seals causing a spongy pedal, or contaminated fluid - replacement and a full system bleed are required to restore correct braking response.
| Model | Variant |
|---|---|
| Land Rover Discovery 1 (1994-1998) | 300Tdi (From VIN MA081992) |
| Land Rover Discovery 1 (1989-1998) | Master Cylinder & Servo - CLASSIC (L318) (From FA393361 to WA799999) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.