SXP500013 | Rear Brake Caliper Carrier - TDV6, 4.0 Cologne V6 | Discovery & Range Rover Sport
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: SXP500013 - Rear Brake Caliper Carrier
SXP500013 is a rear brake caliper carrier. This carrier bracket secures the standard rear brake caliper to the rear suspension mounting and locates the caliper in correct alignment with the rear brake disc. The bracket provides the fixed mounting point for the standard rear caliper on supported 2.7 TDV6 and 4.0 Cologne V6 applications, positioning the caliper so the pads run parallel to the disc faces and ensuring even piston pressure during braking; the casting resists brake reaction forces and transmits loads into the rear suspension mounting to maintain caliper spacing, pad wear characteristics and rotor engagement. When replacing the carrier, inspect mounting faces and guide surfaces for damage or corrosion and use the correct fasteners and torque values for the vehicle application.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Discovery 3 (2005-2009) - 2.7 TDV6 - From VIN 6A388291
- Discovery 3 (2005-2009) - 4.0 Cologne V6 - From VIN 6A388291
- Discovery 4 (2010-2016) - 2.7 TDV6
- Discovery 4 (2010-2016) - 4.0 Cologne V6
- Discovery 4 (2010-2016) - With coil spring suspension - From VIN DA000001
- Range Rover Sport L320 - 2.7 TDV6 - From VIN 6A954281 to VIN 9A999999
Frequently Asked Questions
SXP500013 is the rear caliper carrier that secures the standard rear brake caliper to the rear suspension mounting and accurately locates it relative to the brake disc. It positions the caliper so the pads run parallel to the rotor faces, resists brake reaction forces and transmits braking loads into the suspension mounting to preserve pad wear and rotor engagement. When fitting, inspect the mounting faces and guide surfaces for damage or corrosion and use the correct fasteners and specified torque values for the vehicle application.
| Model | Variant |
|---|---|
| Land Rover Discovery 3 | 2005-2009 - 2.7 TDV6 - From VIN 6A388291 |
| Land Rover Discovery 3 | 2005-2009 - 4.0 Cologne V6 - From VIN 6A388291 |
| Land Rover Discovery 4 | 2010-2016 - 2.7 TDV6 |
| Land Rover Discovery 4 | 2010-2016 - 4.0 Cologne V6 |
| Land Rover Discovery 4 | 2010-2016 - With coil spring suspension - From VIN DA000001 |
| Land Rover Range Rover Sport L320 | 2.7 TDV6 - From VIN 6A954281 to VIN 9A999999 |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.