TCI100060 | Differential Gear Kit - V8, 24-Spline | Defender, Range Rover P38
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: TCI100060 - Differential Gear Kit
TCI100060 is a differential gear kit. Fitted to two-pin differential assemblies, it supplies the crownwheel, pinion and associated differential gears used on compatible front and rear axles. The kit is for axles specified for 24-spline applications and is listed for V8 rear-differential use on the Range Rover P38, and for front and rear differential duties on Defender models (including Defender 90 variants) where two-pin crownwheel and pinion configurations apply. These components transfer torque between the differential carrier and the axle shafts and restore the designed gear-set alignment; fitment must be confirmed against the vehicle's V.I.N. and the axle specification before installation.
Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Defender (1987-2006) - Crownwheel & Pinion 2-pin (From VIN LA930456)
- Defender (2007-2016) - Front Differential (From VIN 7A000001)
- Defender 90 (to 2006) - Front Differential - With ABS (From VIN LA930456)
- Defender 90 (to 2006) - Rear Differential - With ABS (From VIN LA930456)
- Range Rover P38 (1994-2001) - V8 Rear Differential (From VIN XA410482)
Frequently Asked Questions
TCI100060 provides the replacement crownwheel, pinion and associated gears for two-pin differential assemblies on 24-spline axles. It restores the mating gear set that transmits torque from the differential carrier to the axle shafts and is specified for V8 rear-differential use on the Range Rover P38 and for front/rear differential duties on Defender models where a two-pin arrangement is fitted. Always confirm fitment to the vehicle V.I.N. and axle specification before fitting.
| Model | Variant |
|---|---|
| Land Rover Defender (1987-2006) | Crownwheel & Pinion - 2-pin (From VIN LA930456) |
| Land Rover Defender 90 (to 2006) | Front Differential - With ABS (From VIN LA930456) |
| Land Rover Defender 90 (to 2006) | Rear Differential - With ABS (From VIN LA930456) |
| Land Rover Defender (2007-2016) | Front Differential - 2-pin (From VIN 7A000001) |
| Land Rover Range Rover P38 (1994-2001) | V8 Rear Differential (From VIN XA410482) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Replace the kit when the crownwheel or pinion show visible damage, excessive wear, pitting or scoring, or during an axle rebuild where gear set condition cannot be guaranteed. If uncertain, have the axle and gearset inspected by a qualified technician to determine whether replacement is required.
- C8 products are usually supplied by Britpart.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.