TDB000500 | Front Drive Shaft - 1.8 K Series | Freelander 1 2002 On
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
To check the stock of Genuine Parts before placing an order please use our Contact Us page
Land Rover Part Number: TDB000500 - Front Drive Shaft - 1.8 K Series
TDB000500 is a Front Drive Shaft - 1.8 K Series. Fitted to Freelander 1 models, this front drive shaft transfers rotational force from the transaxle to the front differential and wheel hubs, delivering torque to the front wheel hub assembly while accommodating steering and suspension movement through its joints. The shaft is configured for 1.8 K Series installations and may be fitted to either the left or right front axle where that arrangement applies. Inspect gaiters, joint play and for corrosion during routine servicing, and replace if torn, worn or noisy to prevent vibration or reduced drivability. Use the compatibility data below to confirm fitment against your V.I.N.
Compatibility
- Freelander 1 (2002 On) - 1.8 K Series (From VIN 2A000001)
Frequently Asked Questions
The TDB000500 front drive shaft transmits rotational force from the transmission/transaxle to the front differential and wheel hubs, allowing the front wheels to receive engine torque. Its constant velocity joints allow steering and suspension movement while under load. Common failure modes include torn gaiters, excessive joint play or corrosion, which cause vibration, noise or reduced smoothness.
| Model | Variant |
|---|---|
| Land Rover Freelander (1996 - 2006) - Classic (L314) | Front axle drive - 2.5 KV6 petrol; M47 2.0L I4 16V diesel (From VIN 1A000001) |
| Land Rover Freelander 1 (2002 On) | 1.8 K Series (From VIN 2A000001) |
If you are unsure of compatibility with your vehicle, you can also confirm by checking against your V.I.N. Simply reach out to us with your V.I.N and desired part number via our Contact page or use our Finding Part Numbers page.
Inspect the drive shaft during routine servicing; replace if gaiters are torn, there is excessive joint play, significant corrosion, or if vibration or noise is present during acceleration or steering. If unsure, consult the vehicle handbook or a qualified technician.
- C8 products are usually supplied by Britpart.
- L8 products are genuine Land Rover parts.
- Z8 products are normally supplied by Allmakes.
All products and accessories available on LRDirect.com come with a 2-year warranty.